Things You Must Do Before Using This Machine
This section describes the important setting registrations and procedures that must be done
before the machine is used for sending operations. For the further details of the operations, see
"Things You Must Do Before Using This Machine," in the Sending and Facsimile Guide.
IMPORTANT
• If you attempt to use the machine without registering the necessary information correctly, the machine
may not function properly.
• Network settings must be specified to send scanned documents to an e-mail address, an I-fax address,
or a file server. (See the Network Guide.)
Selecting the Type of Telephone Line
Set the type of telephone line that is connected to the machine.
If this setting is incorrect, you will be unable to communicate with other machines. Be sure to
check the type of telephone line that you are using, and make the correct setting.
NOTE
For this setting, the optional Super G3 FAX Board is required.
1
Press
Settings> ➞ [Tel Line Type].
2
Select the type of telephone line ➞ press [OK].
If you do not know the telephone line type, call your telephone service provider for details.
➞ [Communications Settings] ➞ [User Settings] under <Fax
Things You Must Do Before Using This Machine
1
1-25