Using The Product - Beko RCNE560E40ZLXPHUN Manual Del Usuario

Using the product

1. Fault condition indicator
This indicator ( ) shall be active
when your refrigerator cannot perform
adequate cooling or in case of any sensor
error. When this indicator is active,
"E" shall be displayed on the Freezing
Compartment temperature indicator and
figures such as 1,2,3... shall be displayed
on the Cooling compartment temperature
indicator. These figures provide
information to the authorized service on
the error that has occurred.
Exclamation mark may be displayed
when you load warm food to the freezing
compartment or keep the door open for a
long period of time. This is not a fault, this
warning shall be removed when the food
is cooled.
2. Energy saving (display off) indi-
cator
Energy saving function is enabled
automatically and the energy saving
symbol is displayed when the door of the
product is not opened or closed for some
period of time.( )
When the energy saving function is
active, all symbols on the screen other
than the energy saving symbol shall
be turned off. When the energy saving
function is active, pressing any key or
opening the door shall deactivate the
energy saving function and the symbols
on the screen shall return to normal.
Energy saving function is a factory
installed function, it is not possible to
deactivate it.
3. Quick cooling key
When the quick cooling function is on,
the quick cooling indicator shall light
up ( ) and the cooling compartment
temperature indicator shall display the
value 1. Press the Quick cooling key again
to cancel this function. Quick cooling
indicator shall turn off and normal
settings shall be restored. Quick cooling
function shall be automatically cancelled
after 1 hours, unless cancelled by the
user. To cool a large amount of fresh food,
Refrigerator / User Guide
press the quick cooling key before placing
the food in the cooling compartment.
4. Vacation function key
Press the button (
activate the vacation function, and the
vacation mode indicator (
turned on. When the vacation function
is activated, "- -" shall be displayed on
the cooling compartment temperature
indicator and no active cooling operation
shall be performed on the cooling
compartment. You shall not keep
your food in the cooling compartment
when this function is activated. Other
compartments shall be continued to be
cooled as per the temperatures set for
them.
Press the
vacation
cancel this function.
5. Cooling compartment
temperature setting key
The temperature of the cooling
compartment may be set to 8,7,6,5,4,3,2
and 1 respectively when this key is
pressed. ( )
6. Hygiene function key
Press the button (
activate the hygiene function, then the
hygiene function indicator
( ) shall be turned on. Do not open the
door of your product when the hygiene
function is activated. If the door of the
product is opened while the hygiene
function is activated, the hygiene
operation shall be stopped until the door
is closed. The product shall give an audible
warning and end the operation when the
hygiene operation is completed. Keep
the hygiene function key pressed for 3
seconds to end the hygiene operation
before its time set.
If the exclamation mark (
together with the hygiene symbol when you
enable the hygiene function, this means
that the hygiene lamps are about to expire.
Please call the service.
17 /36EN
) for 3 seconds to
) shall be
function key again to
) for 3 seconds to
) is displayed