Power Connection; Attaching The Plastic Wedges - Beko RCNE560E40ZLXPHUN Manual Del Usuario

4 Installation

4.3 Power connection

WARNING:Do not use extension
A
or multi sockets in power
connection.
WARNING: Damaged power
B
cable must be replaced by
Authorized Service.
When placing two coolers in
adjacent position, leave at least
C
4 cm distance between the two
units.
• Our firm will not assume
responsibility for any damages
due to usage without earthing and
power connection in compliance with
national regulations.
• The power cable plug must be easily
accessible after installation.
• Do not use multi-group plug with or
without extension cable between the
wall socket and the refrigerator.
Hot Surface Warning!
Side walls of your product is
equipped with refrigerant
pipes to improve the cooling
system. Refrigerant with high
temperatures may flow through
C
these areas, resulting in hot
surfaces on the side walls. This
is normal and does not need any
servicing. Please pay attention
while touching these areas.

4.4 Attaching the plastic wedges

Use the plastic wedges in the provided with
the product to provide sufficient space for air
circulation between the product and the wall.
To attach the wedges, remove the
1.
screws on the product and use the screws
provided with the wedges.
Attach 2 plastic wedges on the
2.
ventilation cover shown as j in the figure.
14 /36 EN
Refrigerator / User Guide