Function; Maintenance - Blatchford 189128 Instrucciones De Uso

4 Function

This device comprises two main components. The movement between these two components
prior to tightening the pyramid screws and clamp screw allows for alignment of the limb to suit
the individual user. When tightened securely using Loctite 243 and torque settings shown, the
device offers a secure way to connect the two parts of the limb.

5 Maintenance

Visually check the device regularly.
Report any changes in performance of this device to the practitioner/service provider e.g.
unusual noises, movement or significant wear.
Inform the practitioner/service provider of any changes in body weight and/or activity level.
Cleaning
Use a damp cloth and mild soap to clean outside surfaces. DO NOT use aggressive cleansers.
The remaining instructions in this section are for practitioner use only.
This maintenance must be carried out only by competent personnel (practitioner or suitable
trained technician).
The following routine maintenance is to be carried out at least annually:
• Check the securing screws and locking screws for tightness. If loose, remove and clean, then
apply Loctite 243 and tighten to the correct torque setting, see Construction section.
• Check for defects that could affect proper function.
Ensure the user has read and understood all safety and user-level maintenance information.
Advise the user that a regular visual check of the device is recommended and signs of wear
that may affect function should be reported to their service provider (e.g. significant wear or
corrosion).
Advise the user to inform the practitioner/service provider of any changes in body weight and/or
activity level.
If this device is used for extreme activity, the maintenance level and interval should be reviewed
and if required advice and technical support sought to plan a new maintenance schedule
dependent upon the frequency and nature of the activity. This should be determined by a local
risk assessment carried out by a suitably qualified individual.
6
938313PK1/1-0121