Wall Mounting Precautions; Horizontal Mounting Precautions - Ricoh D3210 Manual Del Usuario

3. Installing the Machine

Wall Mounting Precautions

A VESA-compliant bracket is required to mount the machine on a wall.
• Please consult a professional technician for wall mount installations. The manufacturer accepts no
liability for installations not performed by a professional technician.
• At least two people are required to mount or remove a bracket, or move the machine.
• When mounting a VESA-compliant bracket, use the bracket that is 200 × 200 mm (7.9 × 7.9
inches).
• Use a bracket that creates 5 cm (2 inches) or more of clearance when the machine is mounted on a
wall or the ceiling.
• The weight of the machine is about 15 kg (33.1 lb.). Use a mounting bracket with a load capacity
of at least 25 kg (55.1 lb.).
• When mounting the machine on a wall or the ceiling, select a location that can withstand four times
the combined weight of the machine and mounting bracket, such as a concrete wall or pillar.
• When mounting a bracket, use M6 screws.
• Use all the VESA screw holes on the back.
• Screw all holes for mounting.
• Contact your local dealer for details about the recommended wall-mounting bracket for the
machine.

Horizontal Mounting Precautions

When mounting the machine on a horizontal surface, attach the rubber feet to the rear of the machine to
ensure adequate ventilation.
• When attaching the rubber feet, take care to ensure they do not obstruct the machine's air inlets
and outlets, screw holes, or labels.
Attach each of the rubber feet in the specified positions on the rear of the machine.
22