Mounting The Pen Tray - Ricoh D3210 Manual Del Usuario

3. Installing the Machine

Mounting the Pen Tray

After mounting the machine on the dedicated stand or a wall, attach the pen tray to the main unit.
• When the rubber feet are attached to the machine for mounting on a horizontal surface, the pen
tray cannot be attached.
The pen tray may be positioned on the center of the lower part of the main unit or the center of the left
side when viewed from the rear. (The center of the left side is used when installing the main unit
vertically.)
1. Main unit
2. Pen tray
3. Screws for the pen tray
• The screws for the pen tray only need to be finger-tight. Tightening with tools is not necessary.
• When removing the machine from the stand or wall, be sure to remove the pen tray first.
28
1
2 3
EAK004