Technical Specifications - Festo CPX-GP Serie Manual Del Usuario

4

Technical specifications

Pneumatic interface type
General technical specifications
of the CPX terminal
Protection class as per EN 60529 IP65, in fitted state
Operating voltage supply
– Rated voltage
– Internal current consumption
at 24 V (internal electronics)
Load voltage for the valves
– Rated voltage
– Internal current consumption
at 24 V (internal electronics)
– Diagnostic message under-
voltage V
VAL
Digital outputs (valve solenoid
coils)
– Rated load voltage
– Intended for pneumatics
– Short circuit protection at
valve output
Isolation
Electrical isolation
– Between the channels
– To V
EL/SEN
Festo CPX-GP-... 0201NH English
CPX-GP-03-4.0 CPX-GP-CPA-...
See CPX system manual
V (electronics/sensors)
EL/SEN
24 V DC ± 25 %
Typ. 15 mA
V (valves) V (valves)
VAL VAL
24 V DC ± 10% 24 V DC + 10/-15%
Typ. 30 mA Typ. 30 mA
≤ 21.6...21.5 V ≤ 19.8...19.6 V
Max. 26 outputs Max. 22 outputs
V V
VAL VAL
Midi/Maxi CPA (type 12)
(type 03)
Yes (electronic),
response threshold > 1.0 A
Tested with 500 V DC
None
Depends on manifold sub-base
17