Soundcore Liberty Air 2 Pro Manual De Usuario página 3

Charging
Remove the protective film from the earbuds before the first use.
•
Fully dry off the earbuds and the USB port before charging.
•
Use a certified USB-C charging cable and charger to prevent any damage.
•
Fully charge both the earbuds and the charging case before the first use.
•
1. Place the earbuds in the charging case and close it.
The first and the third LED indicators on the charging case will flash twice. This
confirms that the earbuds are being charged.
2. Connect the charging case to the power supply by using a USB-C charging cable.
Alternatively, position the charging case at the center of your wireless charger for
wireless charging.
The LED indicators on the c harging case indicate the charging status.
2
3. To check the battery level of the charging case, open it to activate the LED
indicator.
01 EN
1
or
< 30%
30% - 70%
> 70%
100%
< 10%
10% - 30%
30% - 70%
> 70%