Bluetooth Pairing; Pairing With Another Device - Soundcore Liberty Air 2 Pro Manual De Usuario

Tabla de contenido

Publicidad

Bluetooth Pairing

1. Open the charging case, the earbuds will automatically enter the Bluetooth
pairing mode.
The LED indicator on one earbud will flash quickly and on another earbud
breathe slowly.
2. Select "Soundcore Liberty Air 2 Pro" on your device's Bluetooth list to connect.
When successfully connected, the LED indicator on earbuds will light up white
for 1 second.
1
Each time you power on your Soundcore earbuds, they will automatically
connect to your last successfully connected device if available within the
Bluetooth range.
Mono mode: When Bluetooth connected, you can use either one of the earbuds
only by placing the other one into the charging case and closing it.
When powered on and connected, if either one of the earbuds is out of battery
and powered off, you can keep using the other one.
When you are on a call, place either one of the earbuds into the charging case
and close it, the microphone in the other earbud will be activated.

Pairing with another device

1. Place the earbuds in the charging case and leave the case open. Press and hold
the button on the case for 3 seconds until the earbud LED indicators flash white to
enter the pairing mode.
2. Select "Soundcore Liberty Air 2 Pro" on your device's Bluetooth list to connect.
2
Soundcore
Liberty Air 2 Pro
Soundcore
Liberty Air 2 Pro
EN 04

Publicidad

Tabla de contenido
loading

Tabla de contenido