Operating Conditions - BONFIGLIOLI Vectron ACU-P Serie Manual Del Usuario

1.2. Proper use
The product is an electrical drive component. It is applicable for
 installation in electrical plants
 industrial environments
1.3. Transport and Storage
Ambient temperature:-25 ... 55 °C
Relative humidity: 5 ... 95%, free of condensation.
 Store in original packaging in dry rooms without dust.
 Avoid high temperature variations.
 Connect to mains voltage for 60 minutes after one year of storage before use.
1.4. On opening the package
 Make sure that the delivered product is the part you have ordered.

Check if the product is damaged and make sure that the delivery is complete.

Notify complaints to the supplier immediately.
1.5. Installation
 Indoors , protected against weather influence.
 Avoid direct sunlight exposure.
 Avoid dust.
 Keep away from strong electromagnetic fields.
 Keep away from combustible material.
 Provide sufficient cooling. Install fans when installing the frequency inverter inside
an enclosed cabinet.
 Altitude: ≤3000 m, over 1000 m with derating (output current reduction).
 The degree of protection of the frequency inverter is IP20.

1.6. Operating conditions

Ambient temperature: 0 ... 40 °C
Relative humidity:
Ambient pressure:
2. Instruction for "Safe torque off" function (STO)
The controller release is performed by two digital inputs A (X210A.3) and B (X210B.2)
Caution!
The function "Safe torque off" (STO) is not met by ACU-P.
05/ 2014
maximum 85%, free of condensation
70 ... 106 kPa
28 Quick Start Guide ACU-P
GB
D