Husqvarna 966793002 Manual Del Dueño página 8

CONTAINER INSTALLATION
1. Install containers on support frame, overlapping
containers at center tube.
2. Close cover and lock latch handle over support
tubes.
NOTE: One container should always overlap the other
container at the center tube.
8
ASSEMBLY
CHUTES
1. Slide upper chute onto middle chute, lining up the
middle chute latch and the acorn nut on the upper
chute.
2. Stretch the bungee latch up onto the acorn nut.
3. Push the upper chute through the opening in the
bagger cover.