The Pre Out Setting; The Auto Power Down Menu; The Fl Demo Mode Menu - Pioneer VSX-821-k Manual De Instrucciones

The System Setup menu

The Pre Out Setting

Specify either using the surround back speaker or the front
height speaker connection with the PRE OUT SURR BACK/
FRONT HEIGHT outputs. An additional amplifier is required
for the speaker connection.
• Default setting: Surr. Back
1
Select 'Pre Out Setting' from the System Setup menu.
System Setup
4.Pre Out Setting
1 . Auto MCACC Pre Out
2 . Manual SP Setup
3 . Input Assign
4 . Pre Out Setting
5 . HDMI Setup
6 . Auto Power Down
7 . FL Demo Mode
Return
2
Select which speaker to connect to the PRE OUT SURR
BACK/FRONT HEIGHT outputs using /.
• Surr. Back – Connect the surround back speaker.
• Height – Connect the front height speaker.
3
When you're finished, press RETURN.
You return to the System Setup menu.

The Auto Power Down menu

Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for several hours.
• Default setting: OFF
1
Select 'Auto Power Down' from the System Setup
menu.
System Setup 6.Auto Power Down
1 . Auto MCACC
2 . Manual SP Setup
3 . Input Assign
4 . Pre Out Setting
5 . HDMI Setup
6 . Auto Power Down
7 . FL Demo Mode
Return
2
Specify the amount of time to allow before the power
is turned off (when there has been no operation).
• You can select 2, 4 or 6 hours, or OFF (if no automatic
shutoff is desired).
3
When you're finished, press RETURN.
You return to the System Setup menu.

The FL Demo Mode menu

Set whether or not various demos are to be shown on the
front panel display.
Surr. Back
1
Select 'FL Demo Mode' from the System Setup menu.
System Setup
1 . Auto MCACC
2 . Manual SP Setup
Return
3 . Input Assign
4 . Pre Out Setting
5 . HDMI Setup
6 . Auto Power Down
7 . FL Demo Mode
2
Choose ON or OFF for the demo display.
3
When you're finished, press RETURN.
You return to the System Setup menu.
OFF
Return
7.FL Demo Mode
FL Demo ON
Return Return
06
06
37
En