Gigaset C530 IP Manual Del Usuario página 111

Gigaset C530 IP / LUG - USA en / A31008-XXXXX-XXXX-X-XX / web-conf.fm / 25.03.2015
Configuring the phone via the Web configurator
Note
Observe the following for good voice quality:
u
When making calls using VoIP, avoid performing other Internet activities (e.g. surfing the
Internet).
u
Please note that voice delays can occur depending on the codec used and the network
capacity utilisation.
Assigning send and receive connections
For the number assignment, open the web page:
¤
Settings
Assign send and receive connections to the registered handsets.
The following should be observed:
u
During registration, each handset is automatically assigned the fixed line network
connection as a send connection and all base connections as receive connections.
u
You can assign each handset either a fixed send connection or a line selection. With line
selection, you choose the connection to be used for each call.
u
The Gigaset.net number is fixed as the send connection for each registered handset.
Numbers that end in #9 are automatically dialled via Gigaset.net.
Activating the fixed line network connection as the fallback send
connection
You can activate the fixed line network connection on your phone as a fallback connection. If a
call attempt fails via VoIP, an attempt is automatically made (without prompting) to establish a
connection via the fixed line network.
A fallback is used in the following situations:
u
Your VoIP connections are busy
u
The SIP server for the VoIP connection cannot be accessed
u
The dialled VoIP connection has not yet been configured or has not been configured
correctly (e.g. incorrect password)
u
The phone does not have a connection to the Internet, for example, because your router is
deactivated or not connected to the Internet.
The option to activate the fallback connection is on the web page:
¤
Settings
User-defined dialling plans – specifying rules for telephony
You can define your own dialling plans in the Dialling Plans area on the web page:
¤
Settings
You can specify the following dialling plans:
u
You can define a connection (fixed line network or a VoIP connection) for specific phone
numbers, which should always be used to dial these phone numbers and therefore also for
billing.
If you enter just a few digits (e.g. local area, national or mobile network code) any call to a
number beginning with these digits will be made via the selected connection.
110
¤
Telephony Number Assignment
¤
Telephony Number Assignment
¤
Telephony Dialling Plans