Gigaset C530 IP / LUG - USA en / A31008-XXXXX-XXXX-X-XX / HS_and_other_Devices.fm / 25.03.2015
Multiple handsets
Ending a conference call
¤
Press the End call key
If an internal participant presses the End call key
the external participant.
External call waiting during an internal call
If you get an external call while conducting an internal call, you will hear the call waiting tone
(short tone). The caller's number or name will appear in the display if Calling Line Identification
is enabled.
Ignoring the external call
¤
Press the display key Reject.
The call waiting tone is turned off. You remain connected with the internal participant.
For calls to a VoIP connection: The external caller will hear the busy tone.
For calls to the fixed line network connection: The call continues to be signalled on the
registered handsets.
Accepting an external call/putting an internal participant on hold
¤
Press the display key Accept.
Ending an internal call
¤
Press the End call key
The external call is signalled as an incoming call. You can accept the call (
Internal call waiting during an internal/external call
If an internal participant attempts to call you while you are involved in an external or internal call,
this call is shown on the display (internal call waiting). You can either accept or reject this call.
u
End display:
u
Accepting an internal call:
The internal call is signalled as per usual. You can accept the call.
Changing the name of an internal participant
The base assigns the handset a free internal number during registration (possible numbers:
1– 6). The internal number is shown on the handset display e.g. INT 2. You can change these
names. The name must be no longer than 10 characters. The changed name is displayed in every
handset's list.
u
s
Open list of handsets. Your own handset is indicated by
¤
Select the handset.
¤
Save
72
a
.
a
.
¤
Press any key.
¤
End your current call.
¤
¤
Options
a
, the other handset remains connected to
f
.
q Rename
¤
¤
OK
Enter names.
¢
page 33).