Call Divert - Gigaset C530 IP Manual Del Usuario

Gigaset C530 IP / LUG - USA en / A31008-XXXXX-XXXX-X-XX / netservices.fm / 25.03.2015
Internal Call Forwarding
You can divert all external calls intended for a receive connection on the handset to a different
handset.
v Ç
¤
Activation:
To Handset:
No Handset is displayed if internal Call Forwarding has not been set previously or if the
previously set handset is no longer registered.
Ring Delay: r None / 10 sec. / 20 sec. / 30 sec.
Delay time for the ring delay. If you prefer to have a delay before the call is diverted, select
the length of the delay. If you select None, the call is not signalled on the handset and is
diverted immediately.
¤
Save
The internal Call Forwarding is single-stage only, i.e. if calls for the handset are diverted to a
different handset (e.g. HS1) on which a Call Forwarding is also active (e.g. to HS2), this second
Call Forwarding is not activated. The calls are signalled on handset HS1.
Notes
u
Any call for the handset that has been diverted is entered in the call lists.
u
If a call to a receive connection that is only assigned to the handset is diverted to a
handset that is not available (e.g. the handset is deactivated), the call is rejected after a
short time.
Activating/deactivating call waiting for external calls
If the function is activated, you will hear a call waiting tone during an external call to signal that
another external caller is trying to get through. If you have CLIP, the number of the waiting caller
or the corresponding phonebook entry is shown in the display. The caller will hear the ringing
tone.
When call waiting is deactivated, the caller will hear the busy tone if you are already making a
call and you are the only participant of this connection.
Prerequisite for calls via VoIP: Parallel VoIP connections are permitted on your telephone
(default setting; setting can be changed via the Web configurator).
v Ç
¤
¤
Status:
¤
Send
Call waiting is activated/deactivated for all connections to the telephone and all registered
handsets.
¤ ¤
Select Services OK
¤ r On / Off
¤ r Select internal participant.
¤ ¤
Select Services OK
r On / Off
Using provider-specific functions (network services)
¤ ¤
q Call Divert
OK
q Call Waiting ¤
OK
¤
q Internal
OK.
39