Ec Declaration Of Conformity - Nilfisk T22 Manual De Instrucciones

T22 - T40 - T40W
■
R i s k s d u e t o e l e c t r i c a l h a z a
Risk of electrocution if accessing the electrical
equipment during
deactivated the electrical power supply.
It is forbidden to work on the electric equipment
before disconnecting the machine or its parts from the
electrical line.
Have the electrical maintenance operations performed
by qualified personnel. Perform the checks on the
electric equipment as specified in the manual.
■
R i s k s t o t h e p r e s e n c e o f r e s i d u a l h i g h
a f t e r s t o p p i n g t h e v a c u u m
During maintenance and cleaning operations, the operator
may come into contact while the machine is stopped, with
parts of the vacuum unit with surfaces at high temperatures.
Specific warning signs placed in strategic points indicate the
hazard due to the presence of hot surfaces and the obligation
for the user to wear personal protective equipment, in particular
protective gloves.
The potentially hot parts (high temperatures) are identified as
follows:
E C D e c l a r a t i o n o f c o n f o r m i t y
Every machine comes with a EC Declaration of conformity. See
fac-simile in fig. 27.
GB
The Declaration of conformity is an important document
and should be kept in a safe place to be presented to the
Authorities on request.
C 3 5 4
r d s d u r i n g m a i n t e n a n c e
D A N GE R
maintenance without
FO R BID D E N
M A N D A TO R Y
t e m p e r a t u r e
u n i t .
IT I S M A N D A TO R Y
TO WE A R GL O V E S
C A U TI O N
D A N G E R O U S
T E M P E R A T U R E S
[ N O TE ]
having
4