Return-To-Home (Rth) - DJI MAVIC PRO Guia De Inicio Rapido

Controlling flight with Virtual Joysticks on your mobile device via Wi-Fi
WIFI RC
1. Toggle the Control Mode Switch to turn on Wi-Fi
2. Power on the aircraft
3. Launch the DJI GO 4 app and tap the icon on the top right of your screen,
then scan the Wi-Fi QR Code on the front arm to start connection
4. Tap Auto Takeoff
5. Fly the aircraft with touch control
Turn on your mobile device's Wi-Fi and enter the Wi-Fi password shown on the front
arm to connect to the Mavic network if for any reason you cannot scan the QR code.
When using Wi-Fi in a wide open area with no Electro-Magnetic Interference,
transmission distance is approximately 262 ft (80 m) at an altitude of 164 ft (50 m).
The Wi-Fi frequency of your mobile device can be set to 2.4 Ghz or 5 Ghz. Set
your Wi-Fi to 5 Ghz for less interference. Once connected to the Mavic Pro, you
can change your Wi-Fi password or reset your Wi-Fi connection. (Refer to the User
Manual for more information)
In the DJI GO 4 App
Auto Takeoff
ActiveTrack
Watch the tutorial in the DJI GO 4 app or on the Official DJI website to learn more.
Always set an appropriate RTH altitude before takeoff. When the aircraft is returning
to the Home Point, you should guide it with the control sticks.
8
DJI GO 4
App
Auto Landing
TapFly
Mavic_XXX

Return-to-Home (RTH)

Normal