EMAK T327 Manual De Uso Y Mantenimiento página 13

RECHARGING THE BATTERY:
First recharge - The lithium-ion battery has been partly charged
before shipping. To maintain charge and avoid damage when not in
use, the battery is programmed to enter Sleep mode. To reactivate
the battery, a quick recharge of around ten (10) seconds is required.
When you stop charging:
1) Disconnect the battery charger from the socket outlet.
2) Remove the plug from the battery.
3) Close the dust cover of the AC jack so that dirt and water
cannot enter.
As needed – To check the available charge level, press the Battery
Fuel Gauge button (E, Fig.4) and recharge if necessary (see the
section: CHARGE LEVEL INDICATOR).
STORING THE BATTERY
During winter storage, remove the battery from the motor's battery
holder. Store the battery out of children's reach in a dark and dry place
at above-zero temperatures. The ideal storage temperature for the Li-
ion battery is between 10 and 20°C. Avoid storage in direct sunlight.
Keep the original packing for storage and transport of the battery.
Keep unused batteries away from paper clips, coins, keys, nails, screws
and other metal objects that could cause a short circuit between
the contacts. Do not short-circuit the battery. Do not store batteries
haphazardly in a box or drawer where they may accidentally short-
circuit each other or be short-circuited by other metal objects. A short
circuit between the battery contacts may cause burns or fire. Keep the
original packing for storage and transport of the battery.
WARNING! If the battery is not used for long periods, it must
be fully recharged both when put initially into storage and
every 3 months thereafter, to prevent deterioration and damage.
TRANSPORT
– Li-ion batteries are subject to the requirements of dangerous
goods legislation.
– In the event that they are shipped by a third party, such as an air
or freight carrier, special requirements regarding packaging and
labelling must be met.
– DO NOT use a metal container for transport.
TECHNICAL DATA
Battery capacity
Voltage
DISPOSAL
DAMAGE TO THE ENVIRONMENT!
Do not dispose of spent batteries with
household waste. Dispose of the battery
separately from the machine. Follow local
regulations for disposal.
BATTERY WARRANTY CERTIFICATE
This battery has been designed and produced using the latest
manufacturing techniques. The company guarantees its products for
24 months from the date of purchase, for home and leisure use.
Warranty is limited to 12 months in the case of professional use.
General conditions of warranty
1) The manufacturer of the battery guarantees the product is fully
functional when purchased new, in conformity with its technical
specifications and with current statutory regulations. The
Ah 1,5
V 10,8
company, operating through its sales and technical service
network, will replace the battery free of charge if a defect of
manufacture is discovered.
2) Technical staff will respond as soon as possible within the time
constraints imposed by organisational procedures.
3) To make a claim under warranty, proof of purchase in the
form of an invoice or till receipt must be shown to the
authorised company representative.
4) The warranty becomes null and void if:
• The battery is recharged incorrectly
• The product has evidently not been serviced correctly
• The battery has been used incorrectly or tampered with,
• Non-original spare parts or accessories have been fitted
• Work has been done on the product by unauthorised persons
5) The manufacturer's warranty does not cover consumables or
parts subject to normal wear in operation.
6) Damage caused during transport must be brought to the
attention of the carrier immediately, otherwise the warranty will
be rendered null and void.
7) The warranty does not cover damage caused directly or indirectly
to persons or property by defects in the battery, or resulting from
its enforced and prolonged unavailability for use.
8) If the battery is not used for long periods, it must be fully
recharged both when put initially into storage and every 3
months thereafter, to prevent deterioration and damage. If this
procedure is not followed, the warranty will be rendered null and
void.
13