C5 .
CHANGE THE CHARCOAL FILTER
Charcoal filter is used for nonvented, recirculated installation. The filter should be changed
every 6 to 12 months depending on use.
1.
Remove two screws of the louver which is on the top of
the oven by using a #1 Phillips screwdriver.
2.
Open the door then Remove the louver and take
the used charcoal filter out .
Louver Screw
3.
Install the new charcoal filter.When properly installed,the wire mesh of the filter should be
visible from the front.
4.
Repalce the louver and the screws.
Step-by-step installation guide
Charcoal Filter
Louver
Charcoal
Filter
25