Recirculating(Non-Vented Ductless); C1. Attachthe Mounting Plate To The Wall - Hisense HMO173SR Guía De Uso Y Cuidado

C .

RECIRCULATING(Non-vented Ductless)

INSTALLATION OVERVIEW
C1. ATTACH THE MOUNTING PLATE TO THE WALL
C2. USE TOP CABINET TEMPLATE FOR PREPARATION
OF TOP CABINET C3. ADAPTING BLOWER FOR
RECIRCULATION
C4. MOUNT THE MICROWAVE OVEN
C5. CHANGE THE CHARCOAL FILTER
C 1.
ATTACH THE MOUNTING PLATE TO THE WALL
Attach the mounting plate to the wall using the wing nuts and machine screws (3/16" x 3").At least one wood
screw must be used to attach the mounting plate to a wall stud.
1.Insert the machine screws(3/16"X3") into the mounting plate through holes designed to go into drywall and
attach the toggle wings to ¾" onto each machine screw(3/16"X3").
2.Place the mounting plate against the wall and insert the toggle wings into the holes in the wall to mount the plate.
CAUTION: Be careful to avoid pinching fingers between the back of the mounting plate and the wall.
3.Tighten all bolts. Pull the mounting plate away from the wall to help tighten the bolts.
22
Step-by-step installation guide
To use toggle bolts
Spacing for Toggles More
Than Wall Thickness
Wing nut
machine
Mountin
screw
Plate
Wall
Bolt End