Invacare InTouch Flovair ITFG Instrucciones De Armado, Instalación Y Operación página 3

Determine whether seating surface has one of the following and refer to one of the
following procedures:
• Hook attachment strips
• Loop attachment strips
• No attachment strips
Hook Attachment Strips/No Attachment Strips
1. Remove double sided hook from bottom of seat.
2. Align front edge of seat with front edge of seating surface.
3. Perform one of the following:
• Hook Attachment Strips ‐ Secure the seat to the seating surface, making sure
that the strips of loop on the seat cover are securely attached to the strips of
hook on the seating surface.
• No Attachment Strips ‐ Place the seat on the seating surface.
Loop Attachment Strips
1. Verify the double sided hook strips are securely attached to the loop
attachment strips on the bottom of the seat.
2. Align front edge of seat with front edge of seating surface.
3. Secure the seat to the seating surface, making sure that the double sided hook
is securely attached to the strips of loop on the seat cover and the seating
surface.
Zipper Faces Rearward
Loop Portion of Fastening
Strap (Attached to Seat)
Double Sided Hook
Portion of Fastening
Strap (Remove backing if
necessary)
Seating Surface
FIGURE 1 Attaching/Removing Seat To/From Seating Surface
Part No 1141447
3
Seat
Front of cushion lines up
with front edge of
seating surface
InTouch™ Flovair Seat