Stereo Receiver (Optional) - Jacuzzi J-200 Serie Manual De Instalacion Y Uso & Mantenimiento

Stereo receiver (optional)

BLUEWAVE™ Spa Stereo System
To start enjoying your new stereo receiver, please read the fol-
lowing operation instructions in their entirety.
1
1. Media Locker Handle
Slide the handle to lock and unlock the protective door.
2. Power Button
Press power button once to turn on stereo system. Press a sec-
ond time to place the stereo in "Standby" mode and the red light
will remain illuminated.
3. Auxiliary Input Jack Connector
Allows you to connect an auxiliary device by using a 3.5 mm
cable.
4. Auxiliary Device Holding Base
The removable base securely holds the Auxiliary device, su-
ch as an iPod/MP3/iPhone, in place. It can be removed for lar-
ger devices.
WARNING: RISK OF ELECTRICAL SHOCK HAZARD EXI-
STS AND EQUIPMENT DAMAGE! Never install or remove
electrical devices (AUX(Bluetooth) while hands are wet or
while sitting partially or fully immersed in the spa!
CAUTION: Never leave electrical devices in the Media Locker
when spa is not is use to prevent damage from outdoor ele-
ments! Never spray Media Locker with a pressurized water
hose for any reason! Damage to the device or spa stereo sy-
stem caused by water intrusion is not covered under the ma-
nufacturer's warranty! Damage to Media Locker port or elec-
trical devices due to excessive force or improper alignment
during installation or removal from Media Locker is not co-
vered under warranty.
2
AUX
3
4
29
Electronic Device Connections and Functions
CAUTION: RISK OF ELECTRICAL SHOCK OR EQUIPMENT
Never install or remove electrical devices
DAMAGE!
(AUX(Bluetooth) while hands are wet or while sitting par-
tially or fully immersed in the spa!
USB USB
A AUX UX
(purchased separately)
Connecting Your Auxiliary Device Using the 3.5 mm Cable
(purchased separately):
- Plug one end of the cable to "Aux" connection on the stereo.
- Plug the other end of the cable into the head phone jack
connection on the Auxiliary device.
- Press the Mode button on the remote to "AUX IN".
- All playback operations are conducted via the Auxiliary
Player. The stereo remote functions do not work on the ex-
ternal Auxiliary Player (except volume control).
USB USB
A AUX UX
Connecting Your Bluetooth Device:
- Turn power ON to the stereo unit.
- From your Bluetooth device, make sure the Bluetooth feature
is ON.
- Follow the pairing instructions for your Bluetooth device
and connect to the "BLUEWAVE" device that appears on your
screen.
- When asked for a password, enter the code "0000."
- All operations are conducted via the Bluetooth device.
USB USB
AUX A UX
A A C A AC AC ACCESSORY CONNECTED C C E S S O R R Y Y Y CO NN EC TE TE E D