Installation Of Ceiling Fan Blades; 1/4-20 X 1/2" Oval Head Screws - Emerson ASHLAND CF717AP02 El Manual Del Propietario

10. Installation of Ceiling Fan Blades

10.1
Remove and discard the Five Motor Hub Spacers to
free the Motor for installation of Ceiling Fan Blades
(Figure 20).
10.2
Mount the Flanges to the Blades using Three
#8-32 x 8mm Washer Head Screws (supplied) per
Blade (Figure 21).
Repeat this procedure for remaining Four Blades and
Flanges.
WARNING
!
To reduce the risk of personal injury, do not bend the
blade flanges when installing the flanges, balancing
the blades, or cleaning the fan. Do not insert foreign
objects between rotating fan blades.
10.3
Rotate the Motor Hub to expose the Motor Flange Holes
through the Switch Housing Plate.
Attach a Blade/Flange Assembly to the Motor Hub
using Two 1/4-20 x 1/2" Oval Head Screws (supplied)
(Figure 22). Do not tighten completely at this time.
Install remaining Blade Assemblies in the same way.
Gently snug all Flange Screws to the Motor Hub,
working around the Hub in a clockwise sequence.
NOTE: Take care not to scratch fan housing
assembly when installing blades.
Figure 20
Figure 21
1/4-20 x 1/2" OVAL HEAD
SCREWS (2 per blade / flange
assembly)
Figure 22
14
MOTOR HUB
MOTOR HUB
SPACERS (5)
#8-32 x 8mm
WASHER
HEAD SCREWS
(3 per blade)
FAN BLADES (5)
BLADE FLANGES (5)
BLADE / FLANGE
ASSEMBY (5)
SWITCH
HOUSING PLATE
ETL Model No.: CF717-2