Using Your Ceiling Fan - Emerson ASHLAND CF717AP02 El Manual Del Propietario

12. Installation of Light Kit Assembly
12.8
Cut the Speed Control Switch Pull Chain and the Light
Switch Pull Chain to the desired lengths.
Attach each Pendant/Coupling Assembly (supplied) to
the ends of each Pull Chain using the attached Coupling
(Figure 35).
Please call Technical Support at 1-800-654-3545 if you
have any questions about installation and operation of
this Ceiling Fan.
13.1
Restore Electrical Power to the Outlet Box by turning
the Electricity on at the Main Fuse Box.
Check the operation of the light by gently pulling on
the Light Switch Pull Chain (Figure 36).
Check the operation of the Fan by gently pulling on
the Speed Control Switch Pull Chain (Figure 36).
The operation sequence is as follows:
1st pull - High
2nd pull - Medium
During Summer Months, run the Fan Counter-
Clockwise, as you look up at it, to direct airflow
downward.
During the Winter Months, run the Fan Clockwise, as
you look up at it, to direct airflow upward.
If airflow is desired in the opposite direction, turn
the Ceiling Fan OFF and wait for the Blades to stop
turning.
Slide the Reverse Switch (located on the top of the
Motor Housing) to the opposite position, and turn the
Ceiling Fan on again (Figure 36).
The Fan Blades will turn in the opposite direction and
reverse the airflow.

13. Using Your Ceiling Fan

3rd pull - Low
4th pull - OFF
LIGHT CONTROL
SWITCH PULL CHAIN
COUPLING
SMALL WOOD
PENDANT
Figure 35
LIGHT CONTROL
SWITCH PULL
CHAIN
Figure 36
Reverse Switch Information
Season Blade Rotation Direction
Summer Counter-Clockwise
Winter Clockwise
Please contact 1-800-654-3545 for further assistance
21
(Continued)
SPEED CONTROL
SWITCH PULL CHAIN
COUPLING
LARGE WOOD
PENDANT
REVERSE
SWITCH
SPEED CONTROL
SWITCH PULL
CHAIN
emersonfans.com
ETL Model No.: CF717-2