Tripp-Lite B024-DUA8-SL Manual Del Propietário página 14

Installation
Multi-Monitor Installation
The multi-monitor feature connects two, three or four units to control up to seven
dual-, triple- or quad-monitor computers at once. This installation requires different
cabling than standard cascade configuration and offers an extra level of switching
flexibility for multiple-monitor installations where multiple video cards are installed on
each computer.
13
3
USB Type A to
Type B cables
14
4
Notes:
• Before making any connections, you must first access the OSD and enable the Multi-View
setting (see the Activate Multi-View section of this manual for details).
• Before making any connections, make sure power to all devices being connected to the
KVM switch are turned off. Unplug any computer power cords using the Keyboard Power-On
function.
1
Using a standard USB-A to USB-B device cable, connect the USB-B port on
computer port 8 (CPU 8) of the first level KVM switch to the top USB-A console
port (labeled for mouse functionality) on the second level KVM switch.
Note: Computer port 8 is reserved for connecting KVM switches in a multi-monitor
installation. Up to seven computers can be controlled using computer ports 1 through 7.
2
Repeat step 1 to connect additional KVM switches, with a maximum of four KVM
switches in a multi-monitor installation.
17-10-479-93370A.indb 14
5
7 6
1
2
Third / Fourth
Stage Units
4
Computers with
2/3/4 video inputs
8/9
10/11
12
14
First Switch
DVI Cables
Second Switch
11/17/2017 2:29:01 PM