Tripp-Lite B024-DUA8-SL Manual Del Propietário página 30

Basic Operation
Auto Scan
Initiate Auto Scan Mode
Auto Scan automatically switches between ports at a default of five-second intervals,
accessing only ports that have been set as accessible under Scan–Skip Mode (see the
Scan–Skip Mode section of this manual for details).
To initiate Auto Scan mode:
1. Activate Hotkey Setting mode using the aforementioned command.
2. Press [A] and then [Enter] to automatically exit hotkey mode and enter Auto
Scan mode.
• While in Auto Scan mode, you can pause the scan in order to maintain the
focus on a particular computer by pressing P , or with a left click of the mouse.
When paused, the command line displays Auto Scan: Paused. Pausing when
you want to maintain the focus on a particular computer is more convenient
than exiting Auto Scan mode, because when scanning resumes, you start from
where you left off instead of starting over from the very first computer on the
installation. To resume Auto Scanning, press any key or left-click.
• While Auto Scan mode is in effect, ordinary keyboard and mouse functions
are suspended – only Auto Scan mode compliant keystrokes and mouse clicks
can be input. You must exit Auto Scan mode in order to regain normal control
of the console.
3. To exit Auto Scan mode, press [Esc] or [Spacebar].
Initiate Auto Scan Mode at a Set Interval
To initiate Auto Scan mode at a set interval:
1. Activate Hotkey Setting Mode using the aforementioned command.
2. Press [A] [n] ([n] = 1-255 seconds) and then [Enter] to automatically exit
hotkey mode and enter Auto Scan mode.
• While in Auto Scan mode, you can pause the scan in order to maintain
the focus on a particular computer by pressing [P], or with a left click of
the mouse. When paused, the command line displays Auto Scan: Paused.
Pausing when you want to maintain the focus on a particular computer is
more convenient than exiting Auto Scan mode, because when you resume
scanning, you start from where you left off instead of starting over from the
very first computer on the installation. To resume Auto Scanning, press any
key or left-click.
• While Auto Scan mode is in effect, ordinary keyboard and mouse functions
are suspended – only Auto Scan mode compliant keystrokes and mouse clicks
can be input. You must exit Auto Scan mode in order to regain normal control
of the console.
3. To exit Auto Scan mode, press [Esc] or [Spacebar].
17-10-479-93370A.indb 30
30
11/17/2017 2:29:03 PM