Tripp-Lite B024-DUA8-SL Manual Del Propietário página 38

Basic Operation
Restore
To restore a backup file from a local computer, follow these steps:
1. Make sure the computer the configuration is backed up to is connected to the
KVM switch.
2. Connect the firmware upgrade cable between the KVM's firmware upgrade port
and your computer's DB9 communication port.
3. Shut down all computers on the KVM installation.
4. From the KVM console, log in to the OSD as Administrator and select the F4
ADM function.
5. Once you have selected the F4 ADM function, scroll down to OSD CONFIG
BACKUP / RESTORE. Press [Enter], then press [Y] to invoke OSD Config Backup
/ Restore mode.
6. Run the Firmware Upgrade Utility. In the dialog box, choose OSD Configuration
Backup/Restore, then click Next.
7. In the window that appears, click Restore to recover an OSD configuration stored
in the local computer. If you have previously set a password for this feature,
enter the password in the provided field before clicking Restore. A confirmation
window will appear; click Yes to proceed.
8. Browse for the OSD configuration file you want to use and click Restore. Make
sure the backup file is in the local computer.
9. A confirmation window appears when the restore process is finished and
successful. Click OK to close.
Factory Default Settings
Setting
OSD Invocation Hotkey Command
Hotkey Setting Mode Activation Command
Auto Scan Interval
Hotkey Beeper
Port Switching Hotkeys
Mouse Emulation
17-10-479-93370A.indb 38
Default
[Scroll Lock], [Scroll Lock]
[Num Lock], [-]
5 seconds
Enabled
Enabled
Enabled
38
11/17/2017 2:29:04 PM