Tripp-Lite B024-DUA8-SL Manual Del Propietário página 23

Basic Operation
SET LOGOUT
TIMEOUT
EDIT PORT
NAMES
RESTORE
DEFAULT
VALUES
CLEAR THE
NAME LIST
ACTIVATE
BEEPER
17-10-479-93370A.indb 23
If there is no input from the console for the time duration set
within this function, the User is automatically logged out. A log in
is necessary before the console can be used again.
This enables other users to gain access to a computer when the
original User is no longer accessing it, but has forgotten or has
not logged out. To set the timeout value, type a number from
1–180 minutes, then press [Enter]. The default setting of 0
disables this function.
Note: This feature does not function if Set Login mode is disabled (see
the Set Login Mode section in this manual for details).
To help remember which computer is attached to a particular
port, every port can be given a name. This function allows the
Administrator to create, modify, or delete port names.
To edit a port name:
1. Click the port, or highlight it and press [Enter].
2. Type the new port name or modify/delete the old one. The
maximum character length allowed for the port name is
12. Legal characters include: All alpha characters: A–Z, all
numeric characters: 0–9, and special characters * ( ) + : - ,
? . /
Port names are case insensitive; the OSD displays port
names in all capitals, regardless of how they were entered.
3. When finished editing, press [Enter] for the change to take
effect. To abort the change, press [Esc].
This function is used to undo all changes and return the setup
to the original factory default settings (see the Factory Default
Hotkeys and Settings section in this manual for details), except
for the port name list, and username and password information,
which are saved.
This function clears the port name list.
Choices are Y (on), or N (off). When activated, the beeper
sounds whenever a port is changed, when activating the Auto
Scan function (see the F7 Scan section in this manual for
details), or when an invalid entry is made in an OSD menu. The
default is Y.
23
11/17/2017 2:29:03 PM