Tripp-Lite B024-DUA8-SL Manual Del Propietário página 37

Basic Operation
OSD Configuration Backup/Restore
The Firmware Upgrade Utility allows back up of the KVM's current OSD configuration
and the ability to restore it when necessary. Storing OSD configuration settings is
useful when deploying more than one installation using the same settings.
Backup
To store a backup file to a local computer, follow these steps:
1. Make sure your computer is connected to the KVM switch.
2. Connect the Firmware Upgrade Cable from the KVM's firmware upgrade port to
your computer's DB9 communication port.
3. Shut down all computers on the KVM installation.
4. From the KVM console, log in to the OSD as Administrator and select the F4
ADM function.
5. Once you have selected the F4 ADM function, scroll down to OSD CONFIG
BACKUP / RESTORE. Press [Enter], then press [Y] to invoke OSD Config Backup
/ Restore mode.
6. Run the Firmware Upgrade Utility. In the dialog box, choose OSD Configuration
Backup/Restore, then click Next.
7. In the window that appears, click Connect Device.
8. In the Password field, type in a password for the file.
Note: Setting a password is optional. If you do not set one, the file can be restored
without specifying a password.
9. Click Backup.
10. When the browser asks what you want to do with the file, select Save to disk,
then save it in a convenient location.
17-10-479-93370A.indb 37
37
11/17/2017 2:29:04 PM