Restore Default Settings; Mouse Emulation - Tripp-Lite B024-DUA8-SL Manual Del Propietário

Basic Operation
Alternate OSD Invocation Hotkey Command
By default, the OSD Invocation Hotkey is [Scroll Lock] [Scroll Lock]. To toggle between
[Scroll Lock] [Scroll Lock] and [Ctrl] [Ctrl], perform the following steps:
1. Activate Hotkey Setting mode using the aforementioned command.
2. Press and release the [T] key.
Keyboard Operating System
A port's operating system can be changed to match that of the computer it is
connected to. To change a port's operating system:
1. Navigate to the port whose Operating System setting you wish to change.
2. Activate Hotkey Setting mode using the aforementioned command.
3. Press and release the [F1] (for Windows), [F2] (for Mac), or [F3] (for Sun) key.

Restore Default Settings

To restore the KVM to its factory default settings, perform the following steps:
1. Activate Hotkey Setting mode using the aforementioned command.
2. Press and release the [R] key, then press and release the [Enter] key.
Video Sync
Video Sync allows the KVM to store the monitor's EDID (Extended Display Identification
Data), which helps to ensure optimal video settings are being used. To initiate a Video
Sync, perform the following steps:
1. Activate Hotkey Setting mode using the aforementioned command.
2. Press and release the [D] key.

Mouse Emulation

By default, Mouse Emulation is enabled. To toggle mouse emulation on/off, perform
the following steps:
1. Activate Hotkey Setting mode using the aforementioned command.
2. Press and release the [M] key.
17-10-479-93370A.indb 32
32
11/17/2017 2:29:03 PM