GLOBBER ONE K E-MOTION 10 Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
10 - TROUBLESHOOTING
Problem
Possible cause
Solution
Battery is not charged Fully charge the battery. The first charge takes approximately 4 hours and up to 3 hours for recharges.
Scooter will not
run
Wires or connectors
are loose or
Check to ensure that the charger is securely plugged into both the wall socket and the scooter.
unplugged
Fully charge the battery. The first charge takes approximately 4 hours and up to 3 hours for recharges.
The battery does not
Check to ensure that the charger is securely plugged into both the wall socket and the scooter.
charge completely.
Make sure that the wall socket is connected to the mains power.
Scooter run-
time is short
1. You have been using your scooter for a while. The battery has certainly lost its capacity.
The average rechargeable battery life is 1 to 2 years depending on scooter conditions and use, the
Battery will not charge
maintenance (at least one charging per month) and storage (dry place at temperature between 5 and
fully
30 degrees)
2. Your scooter is new and has low autonomy?
In both cases (1 and 2) the battery needs to be changed, please contact your dealer.
8
Excessive overload (a steep incline, or the rider is too heavy) may have caused the motor to overheat
Excessive use of
and trip the safety. If such a sudden stop of the scooter occurs, wait about a minute before switching the
scooters
battery on again.
Scooter
Wires or connectors
suddenly stops
are loose or
Check all wires and connectors to make sure they are connected and secure.
working
unplugged
Improper use in
wet environment
ONE K E-MOTION 10 is not designed for wet, rain or puddle use.
which has led to an
If your problem arises as a result of such use please contact your dealer.
electronic short cut
Be careful not to overload the scooter beyond the maximum weight limit (50 kg).
Scooter is overloaded
Be careful not to use your scooter on steep slopes, and do not pull or tow objects or people.
Avoid overloading the scooter as this will cause premature wear of the battery and its components.
Scooter runs
sluggishly
Unsuitable riding
Ride only on solid, flat, clean and dry surfaces such as a bike path or level ground.
conditions
9

Publicidad

Tabla de contenido
loading

Tabla de contenido