Microlife BP3AQ-1 Manual De Instrucciones página 3

• Ensure the cuff tubing is not kinked during use as harmful injury may occur
due to the effect of blood flow interference caused by high pressure in the
cuff not releasing.
DO NOT:

Use this device if you think it is damaged or anything appears unusual (e.g.
sporadic operation, open packaging upon purchase).

Use the displayed pulse for checking the frequency of heart pacemakers as
this device is not suitable for this action.

Open/modify this device; inaccuracy and/or harmful injury may result.

Conduct many frequent measurements as this may result in harmful injury
due to blood flow interference.

Place the Cuff over a wound as this may cause additonal injury.

Place and pressurize the Cuff over/near any present intravascular access or
therapy, or arteriovenous shunt, as this may cause blood flow interference
and result in harmful injury.
 Place and pressurize the Cuff over a limb near the side of a mastectomy as
this may cause harmful injury.

Use the Blood Pressure Monitor on a limb simultaneously with other med-
ical equipment on the same limb due to possible interference with such
medical equipment.

Maintain pressure in the Cuff applied to the limb for a prolonged amount of
time. Ensure that circulation in the limb is not impaired by checking circula-
tion if prolonged/repeated exposure to pressure occurs.

Service the device when being used or when power is supplied. When the
device is not in use and power is removed, cuff assembly, batteries and ac
adapter (if applicable) may be replaced by the user with Microlife supplied
replacements. No other parts/components are accessible.
CAUTION – Potentially hazardous situation that if not avoided
may result in minor/moderate injury, property damage, and/or
damage to the device
• This device contains sensitive electronics components. Avoid strong electri-
cal or electromagnetic fields in the direct vicinity of the device (e.g., mobile
telephones, microwave ovens). These can lead to temporary impairment of
the measuring accuracy. Move the device to another location if interference
is determined.
2