Important Information On Blood Pressure And Its Measurement; How Does High/Low Blood Pressure Arise; Which Values Are Normal - Microlife BP3AQ-1 Manual De Instrucciones

2. Important information on blood pressure and its measurement

2.1. How does high/low blood pressure arise?

Your level of blood pressure is determined in the circulatory center of the
brain and adjusts to a variety of situations through feedback from the nervous
system. To adjust blood pressure, the strength and frequency of the heart
(pulse), as well as the width of circulatory blood vessels is altered. Blood
vessel width is affected by fine muscles in the blood vessel walls.
Your level of arterial blood pressure changes periodically during heart activi-
ty. During the "blood ejection" (Systole), the value is highest (systolic blood
pressure value). At the end of the heart's "rest period" (Diastole), pressure is
lowest (diastolic blood pressure value).
Blood pressure values must lie within certain normal ranges in order to pre-
vent particular diseases.

2.2. Which values are normal?

Blood pressure is too high if your diastolic pressure is above 100 mmHg
and/or your systolic blood pressure is over 160 mmHg, while at rest. In this
case, please consult your physician immediately. Long-term values at this
level endanger your health due to continual damage to the blood vessels in
your body.
If your systolic blood pressure values are between 140 mmHg and 159 mmHg
and/or the diastolic blood pressure values are between 90 mmHg and 99
mmHg, consult your physician. Regular self-checks are necessary.
If you have blood pressure values that are too low (i.e., systolic values under
105 mmHg and/or diastolic values under 60 mmHg), consult your physician.
Even with normal blood pressure values, a regular self-check with your blood
pressure monitor is recommended. You can detect possible changes in your
values early and react appropriately.
If you are undergoing medical treatment to control your blood pressure, keep
a record of values along with time of day and date. Show these values to
your physician. Never use the results of your measurements to inde-
pendently alter the drug doses prescribed by your physician.
7