How To Insert The Mixing Knife - Thermomix TM6 Manual De Instrucciones

Thermomix®
1. Hold the mixing bowl so that the opening points upwards.
2. Turn the mixing bowl base 30 degrees clockwise away from the handle and
pull the mixing bowl base off downwards. This may be stiff to begin with.
The mixing knife will remain in the mixing bowl.
3. Carefully take hold of the mixing knife above the blades and remove it,
together with its sealing ring, from the mixing bowl.
5.1.3.2

HOW TO INSERT THE MIXING KNIFE

NOTICE
Material damage as a result of the incorrect
assembly of the mixing knife.
If the mixing knife is not correctly inserted and locked
into place or the sealing ring is damaged, moisture can
get inside the appliance and damage the base unit.
• Ensure that the sealing ring of the mixing knife is fitted to
the knife bearing.
• Ensure that the sealing ring on the mixing knife shows no
signs of damage.
• Ensure that the mixing knife is correctly inserted and locked
into place before filling the mixing bowl.
• If liquid leaks or spills into the housing of the base unit,
unplug the appliance and contact the repair service.
1. Ensure that the sealing ring of the mixing knife is correctly positioned under
the knife bearing.
2. Hold the mixing bowl so that the opening points upwards.
3. Carefully take hold of the mixing knife above the blades and insert it,
together with the sealing ring, into the hole in the bottom of the mixing bowl
until the sealing ring is touching the base of the bowl.
4. Attach the mixing bowl base to the bottom of the mixing bowl.
5. Turn the mixing bowl base 30 degrees counter-clockwise towards the handle
to lock the mixing knife firmly in place.
6. Check that the mixing bowl base is firmly in place. The mixing bowl will
only go into the base unit if it has been correctly assembled.
23
en