Cleaning The Pneumatic Tool - Prebena PKT-2-ES40-S Manual Del Usuario

Cleaning the pneumatic tool

The pneumatic tool should only be cleaned by personnel who have
the necessary skill, capability, and experience. All tasks not
described here should only be performed by the manufacturer's
customer service organization, or in the manufacturer's facilities.
Light fouling
Wipe off the housing of the pneumatic tool with a dry cloth.
Oil all metal parts of the pneumatic tool with a thin application of
PREBENA special nailer oil.
WARNING
Inadvertent release when emptying the
magazine can result in severe or fatal injuries.
Remove compressed air cartridge prior to
cleaning (see page 35).
Empty magazine prior to cleaning (see
page 35).
CAUTION
Non-suitable cleaning agents can damage the
pneumatic tool or the accessories.
Only use a dry cloth, a slightly damp cloth,
or a cloth slightly dampened with a mild
soap solution, to clean the pneumatic tool.
Cleaning the pneumatic tool
41