Removing Jammed Fasteners (Pkt-2-N65-S) - Prebena PKT-2-ES40-S Manual Del Usuario

If a malfunction cannot be resolved in spite of these instructions,
notify your dealer or the manufacturer (see page 61). .
Removing jammed fasteners
(PKT-2-N65-S)
The PKT-2-N65-S has a cover plate on the nose of the tool. This
cover plate allows removal of jammed or deformed fasteners from
the nose of the tool.
Proceed as follows to remove a jammed fastener:
Detach the compressed air cartridge from the pneumatic tool (see
page 35).
Empty the magazine (see page 36).
Troubleshooting
47