Basic Safety Instructions; Proper Use - Prebena PKT-2-ES40-S Manual Del Usuario

Basic Safety Instructions

Comply with and heed all warnings and instructions in this operating
manual and on the pneumatic tool when handling the pneumatic tool.

Proper Use

Type PKT-2-J50-S, PKT-2-J50-SY, PKT-2-J50 SVN and PKT-2-N65-
S pneumatic tools are used to drive brads into wood.
Pneumatic tool types PKT-2-ES40-S and PKT-2-ES40-SY, on the
other hand are used to drive staples into wood.
These pneumatic tools can also be used to anchor rubber mats and
plates onto wood. Only rubber mats and plates with the following
material characteristics should be used:
Shore hardness "A" rubber mats that are half as thick (maximum)
as the length of the fastener.
Zinc and aluminum sheet metal with a thickness of max. 0.7 mm
and tensile strength of max.180 N/mm
Basic Safety Instructions
2
.
7