Troubleshooting; Malfunction Overview - Prebena PKT-2-ES40-S Manual Del Usuario

Troubleshooting

Malfunction overview

Symptom
The pneumatic tool
loses air.
Driving force adjustment
is not effective. (Only for
PKT-2-ES40-S,
PKT-2-ES40-SY,
PKT-2-N65-S and
PKT-2-CLIP45-SY).
WARNING
Serious or fatal injuries are possible when
operating a damaged or malfunctioning
pneumatic tool.
If there is a malfunction immediately
remove the compressed air cartridge from
the pneumatic tool (see page 35)
Empty the magazine (see page 36).
Do not use the pneumatic tool until the
malfunction has been resolved.
CAUTION
The pneumatic tool can be damaged if repairs
are performed by unauthorized persons.
Only have repairs performed by the
manufacturer.
Possible cause:
The anchoring screws
are loose.
A seal is defective.
The pressure reduction
valve is defective.
Troubleshooting
Remedy
Tighten the anchoring
screws.
Notify customer service
(see page 61).
Notify customer service
(see page 61).
43