Attaching The Compressed Air Cartridge - Prebena PKT-2-ES40-S Manual Del Usuario

Attaching the compressed air cartridge

Important instructions for handling compressed air cartridges
Only use original KT-1000 compressed air cartridges to operate
the pneumatic tools described in this document.
Only use the KT-1000 compressed air cartridge to supply
compressed air to the pneumatic tools described in this manual.
Keep the valve of the compressed air cartridge, and the
pneumatic tool connection clean, and protect these elements from
damage. Remove fouling prior to placing in service. Heavy fouling
should only be removed by the manufacturer.
Do not use defective or damaged compressed air cartridges.
Exchange defective or damaged compressed air cartridges
through your dealer.
The lettering on the compressed air cartridge should not be
removed or made illegible.
Only transport and store compressed air cartridges in the original
packaging or in the pneumatic tool's transport case.
Do not transport the compressed air cartridge when it is
connected. Disconnect the compressed air cartridge from the
device after each use.
WARNING
Injury hazard due to unsuitable compressed air
cartridges.
Only use original PREBENA type KT-1000
cartridges.
Preparing the pneumatic tool
19