Removing Jammed Fasteners (Other Device Types) - Prebena PKT-2-ES40-S Manual Del Usuario

Fill the magazine (see page 21).
Attach the compressed air cartridge (see page 19).
Press the nose of the tool against a trial piece of wood and check
the function.
If the malfunction is not resolved, then contact your dealer or the
manufacturer (see page 61).

Removing jammed fasteners (other device types)

Proceed as follows to remove jammed fasteners.
Remove the compressed air cartridge from the pneumatic tool
(see page 35).
Empty the magazine (see page 36).
Loosen and remove the Allen screws on the cover plate.
Remove the cover plate from the housing (see page 11).
Removed the jammed or deformed fastener.
Attach the cover plate with the Allen screws.
Fill the magazine (see page 21).
Attach the compressed air cartridge (see page 19).
Press the nose of the tool against a trial piece of wood and check
the function.
If the malfunction is not resolved, then contact your dealer or the
manufacturer (see page 61).
CAUTION
Injury hazard posed by an unlocked snap
fastener.
Ensure that the clip engages in the
receptacle provided and that the snap
fastener is locked.
Troubleshooting
49