Assembling Your Breville Die Cast Series™ Espresso Machine - Breville Die Cast 800ESXL Manual Del Usuario

ASSEMBLING YOUR BREVILLE DIE CAST SERIES™ ESPRESSO MACHINE
Your Die Cast Series Espresso machine will have
the Drip Tray and Water Tank in place when you
unpack it from the box.
The Storage Tray, 2 stainless steel Filters,
Cleaning Tool and Measuring/tamping Spoon will
be packed in a plastic sleeve. The Filter Holder
and Frothing Jug will be packed inside the foam
packaging. Ensure you have located all parts
and accessories before throwing out the
packaging.
10
ASSEMBLING YOUR BREVILLE DIE CAST SERIES ESPRESSO MACHINE
Remove the Drip Tray and Water Tank and wash
all parts and accessories in warm, soapy water
using a non-abrasive washing liquid. Rinse and
dry thoroughly.
NOTE: Do not clean any of the parts or
accessories in the dishwasher
TO REASSEMBLE: STEP 1
Insert the Storage Tray into the base of the
machine and slide in towards the back wall.
This is a convenient location to store the
Cleaning Tool, stainless steel Filters and
Measuring/tamping Spoon when not in use.