Basic Guide - Segway Loomo Manual Del Usuario

3.

Basic Guide

3.1 Powering Loomo on/off and switching between SBV & Robot modes
Transform Button
Power Button
SBV Mode
Power On:
Place Loomo upright, and then press the
power button to power Loomo on. Loomo
will then activate its self-balancing ability.
Power Off：
Press the power button to power it off.
Please note that Loomo will suddenly lose
balance when it is powered off. For safety
reasons, please hold and manually put
Loomo down. Pressing the power button
will not work when someone is riding
Loomo.
04
Robot Mode
Transform:
Loomo has two modes, SBV (Self-Balancing
Vehicle) mode and robot mode. SBV mode is
designed for personal transportation. Robot
mode is designed for other robot capabilities.
You can switch Loomo between these two
modes by pressing the transform button.
Forced Shutdown：
Press the power button (for about 5s) until
Loomo starts to beep, after which Loomo will
shut down in 30s. Please use this functionality
only when Loomo becomes unresponsive.
3.2 Charging
Charge Loomo only when it is powered off.
Open the rubber cap. Insert the plug into the socket.
2 3
Do not leave Loomo's batteries uncharged for a long time.
To avoid degradation of the battery, Loomo has to be charged at least every 6
months.
Locate the charging port.
1
05