Appendix - Accessories - Riello RS 55/M BLU Instrucciones De Instalación, Uso Y Mantenimiento

A

Appendix - Accessories

Output power regulator kit for modulating operation
With the modulating operation, the burner continually adapts the
power to the request for heat, ensuring great stability for the pa-
rameter controlled: temperature or pressure.
Parameter to be checked
Temperature
Pressure
Output power regulator kit with signal 4-20 mA, 0-10V
Two components should be ordered:
• the analogue signal converter;
• the potentiometer
Burner
RS 55/M BLU
Radio disturbance protection kit
If the burner is installed in places particularly subject to radio dis-
turbance (emission of signals exceeding 10 V/m) owing to the
presence of an INVERTER, or in applications where the length of
Burner
RS 55/M BLU
Long head kit
Burner
RS 55/M BLU
Spacer kit
Burner
RS 55/M BLU
Clean contacts kit
Burner
RS 55/M BLU
Continuous purging kit
Burner
RS 55/M BLU
Soundproofing box kit
Burner
RS 55/M BLU
Appendix - Accessories
Adjustment field
- 100...+ 500°C
0...2.5 bar Output probe
0...16 bar
Potentiometer
Type
ASZ...
Code
3010386
Code
20040373
Code
3010129
Code
3010419
Code
3010094
Code
3010403
Two components should be ordered:
• the output power regulator to be installed on the burner
• the probe to be installed on the heat generator
Probe
Type Code
PT 100 3010110
3010213
4...20 mA 3010214
Code
3010402
the thermostat connections exceeds 20 metres, a protection kit is
available as an interface between the control box and the burner.
Interface adapter RMG to PC kit
Burner
RS 55/M BLU
Gas trains in compliance with EN 676
Refer to page 18 of the manual.
35 GB
Output regulator
Type
RWF50.2 20082208
RWF50.5 20099657
Analogue Signal Converter
Type Code
E5202 3010390
Code
3002719
Code
20040559