Automatic Programmes - GE Profile HGE6030DI Manual De Uso

Programming the
Duration and End
of Cooking
Automatic
Programmes
36
Setting the time of the cooking ends
· Touch the symbol
the current time plus the duration of cooking set, flashes on the
screen
· Set the time of the end of cooking using the symbols "+" and "-"
and confirm touching the symbol
· Set the flashing minutes at the value desired, using the symbols
"+" and "-"
· Confirm touching the "start/stop" symbol.
At this point the oven is programmed to cook for the time set and
switch off at the time desired. Until cooking begins, the symbols
and flash on the display.
When cooking has started, these symbols remain fixed and the "Pre
Heat" symbol lights up. During cooking, the temperature and the
time cooking is to end that have been set are shown alternately on
the display.
For example: If you have programmed cooking for 0 minutes at
9:00 a.m with the end time of .00 p.m., the oven will automatically
go on at .0 p.m. and end at .00 p.m. with the oven automati-
cally switching itself off.
When the cooking is completed, the oven buzzer sounds and dis-
plays the symbol flashing. To zero the display, touch the "start/
stop" symbol for  second. You can stop the programme before the
end by touching the "start/stop" symbol.
CHICKEN
With this function you can set an automatic programme to roast
a chicken as follows:
· Set the roasting according to the size of the chicken touching
the end of the symbol
sizes of chicken.
· The temperature suggested for this programme is 0°C. You can
change it as you like using the "+" and "-" buttons.
· Touch the "start/stop" symbol to start the programme
· The oven goes on and reaches the temperature set. In this phase
the "Pre Heat" icon is on the display.
; the time suggested, which is the sum of
. The display shows three different