Key To Symbols; Symbols On The Machine; Symbols In The Operator's Manual - Husqvarna T525 Manual De Instrucciones

Symbols on the mac hine:
W ARNING! Chainsaws can be
dangerous! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the
machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in the Technical data chapter
and on the label.
Use appropriate protections for foot-leg
and hand-arm.
WARNING! This chainsaw is for use
by trained tree-service operators
only. Use without proper training can
result in severe injuries!
Chain brake, activated (right) Chain
brake, not activated (left)
Air purge
Refuelling.
Adjustment of the oil pump
Chain oil fill.
Working position.
2 – English
KEY T O SYMBOLS
Choke.
Always use the recommended
spark plug type! Use of the
wrong spark plug can damage
the piston/cylinder. Check that
the spark plug is fitted with a
suppressor.
Other symbols/decals on the mac hine refer to special
certification requirements for certain markets.
Symbols in the operator' s
manual:
Switch off the engine before carrying
out any checks or maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chainsaw is started.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May
cause serious personal injury.