Caller Id Solutions - GE 25880 Guia Del Usuario

• Move closer to base (cordless handset might be out of range).
• Make sure base is not plugged into an outlet with another household
appliance.
• Charge the battery.
Unit beeps
• Place the handset in the cradle for 20 seconds. If it still beeps, charge
battery for
16
• Clean charging contacts on cordless handset and charge cradle with a
soft cloth, remove comma or an eraser.
• See solutions for "No dial tone" on previous page.
• Replace the battery.
Memory Dialing doesn't work
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
Unit locks up and no communication between the base and cordless
handset
• Unplug the AC power adaptor from the wall outlet and the back of the
base. Remove the handset battery. Wait for 30
power adaptor back into the base and wall outlet. Reconnect the battery
and charge for

Caller ID Solutions

No Display
• Is battery fully charged?Try replacing the battery.
• Make sure that the unit is connected to a non-switched electrical outlet.
Disconnect the AC power adaptor from the base and reconnect it.
44
hours.
hours.
16
seconds and plug the