Declaration Of Conformity; Troubleshooting; Environmental Protection - Worx WX543 Manual De Instrucciones

In order to avoid operation malfunctions, do not saw
gypsum board from below or overhead.
The guide roller should occasionally be checked for
wear and lubricated with a drop of oil. If it is worn, it
must be replaced.
MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage
your power tool.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0℃-45℃.
The recommended ambient temperature range for
the charging system during charging is 0℃-40℃.
12 12

TROUBLESHOOTING

Possible
Symptom
Causes
Overload
Battery
temperature
The tool
too high
suddenly
stops
during
operation.
Low battery
capacity
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authorities or retailer for recycling
advice.
Cordless Jigsaw
Possible Solution
Relieve the load
on the machine
immediately and
allow cooling for
approx. 30 seconds
by running the
machine on no-load.
Charge the battery
pack.
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product,
Description WORX Cordless Jigsaw
Type Designation WG543 WX543.9 (540-559
- designation of machinery, representative of
Jig Saw)
Function Sawing various materials
Complies with the following directives,
2006/42/EC,
2014/30/EU,
2011/65/EU
Standards conform to
EN 62841-1,
EN 62841-2-11,
EN 55014-1,
EN 55014-2
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH Grüner Weg
10, 50825 Cologne, Germany
2018/03/19
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P . R. China
EN