Navigating Config Menus And Submenus - Tripp-Lite PDUMNH16HVAT El Manual Del Propietario

5. Using the Digital Display
5.2 Navigating Config Menus and Submenus (Configuration)
While in any Display Menu, press and hold Mode button for 2 seconds to enter the first Config
menu. Press Mode button to cycle to the next Config menu. Press and hold Mode button for 2
seconds to switch to Display menus.
Temperature Unit Options
C – F
2 Seconds
C – F
Preferred Source Selection
P S S
2 Seconds
P S S
Auto Scroll Enable/Disable
2 Seconds
15-09-215-93338F.indb 13
Hold Enter button for 2 seconds to switch
between options. The letter in the 2-digit
F
display indicates the selected unit, C for
Celsius and F for Fahrenheit.
C
Hold Enter button for 2 seconds to switch
between Source A and Source B. The letter in
A
the 2-digit display indicates the selected source.
Note: If both sources are available, the unit will
transfer to the preferred source immediately once the
setting is changed.
When enabled, the Auto Scroll function
changes menus in 4-second intervals. "y"
indicates the function is enabled; "n" indicates
that it is disabled. Pressing any button
interrupts the auto scroll function, allowing the
user to navigate between menu options. If no
button is pressed, there is a 10 second
timeout and auto scroll will resume from the
current menu.
13
9/30/2015 4:56:31 PM