How To Up-To-Date The Software; Configuration Of The Board - Bosch WBE 4140 Instructions De Réparation

5. How to up-to-date the
software
The new generation of boards used by Sicam works on
Windows CE; this allows our Research & Development
Department to up-to-date the machines constantly in
order to solve possible programming mistakes and
to add functions to the machines like translations in
several languages and special programmes.
The updates are sent through USB driver or e-mail.

How to up-to-date the software:

1. Unzip the file that you have received by e-mail (intall.
zip);
2. copy the whole "Install" folder in the USB driver;
3. connect the USB driver to the balancing machine;
4. start the machine;
5. wait for the update to be charged;
6. repeat the calibration of the machine.
!
Edis link: Edis\SOFTWARE\systemsw\WBE4140
Robert Bosch GmbH
How to up-to-date the software | WBE 4140 | �1
6.

Configuration of the board

i
The board is configured during the installing. It
requires an activation code that determines the main
details
i
Every time that you install a new board or that you
up-to-date the software manually, you must insert
the activation when you turn on the machine for the
first time.
i
Entrare nel menu calibrazione factory per attivare la
funzione illumnitatore.
Machine code
When a new "neutral" board is charged, you have to
insert an activation code to recognise the version of
the balancing machine where the board is going to be
installed. This code is also useful to charge the setting/
parameters connected to those of the machine.
Every version has a code that is inside the spare part
packaging; otherwise you can ask the assistance to be
provided with..
To insert the code press the arrow key <o> e <u> to
increase the numbers and <z> e <r> to move to the
following space.
How to Reset the machine code
Follow these instructions to reset the machine code
that has been inserted:
1. Press the ARROW KEYS <o>, <u>, <o>;
2. Insert the reset code (36443).
"
Now, when you turn on the machine, the board will
need to be reactivated through a configuration code.
en
|
1 695 655 779 2010-11-9