Making The Pneumatic Connection To The Product - Bosch Rexroth HD 2 Instrucciones De Montaje

Connect the HD 2 to the
compressed air supply.
Use the pneumatic diagram:
• A, lifting movement
• B, rotary movement
7.5.4

Making the pneumatic connection to the product

High pneumatic pressure!
Risk of severe injury or death.

Switch off the compressed air supply to the relevant system component before
assembling, disassembling or connecting the product to the pneumatic system.

Secure the system against being switched back on unintentionally.
• For the compressed air and operating pressure specifi cations, see page 37.
A
D8
Fig. 9: Pneumatic diagram
WARNING
B
D8
3 842 358 735/2019-10, MIT: HD 2, Bosch Rexroth AG
Assembly 21/38
D8 D8
358 735-08